Standard Bearings
Yeonhap System’s Standard bearings optimally respond to everything from delivery date to unit price through global sourcing that can be had when you want and need it.
Major Standard bearings
There are many other products in addition to the products below, so please contact us if you have any questions.
Deep Groove Ball Bearing (DGBB)
Ball bearings are assembled between the shaft and housing to support the rotating shaft and reduce friction. Ball bearings support a rotating shaft while reducing friction between the shaft and stationary parts.
Cylindrical roller bearings (CRB)
Roller bearings are intended to transmit loads while reducing friction, similar to ball bearings. Roller bearings, on the other hand, rather than using balls to transfer stress, use unique cylindrical rolling pieces to keep the bearing’s moving elements in place.
Angular Bearing (ACBB)
Angular ball bearings are non-separable bearings that support axial loads and loads perpendicular to the axis. In the case of single-row angular ball bearings, a double-row angular ball bearing must be used or a combination of two bearings must be used.
Tapered roller bearing (TRB)
Tapered roller bearings are mainly used to bear radial loads and axial loads, mainly radial loads. Compared to angular contact ball bearings, they have larger bearing capacity and lower limiting speed.
Thrust bearing (TBB)
A thrust bearing is a bearing that supports an axial load. The axial load is transmitted to a collar connected to the shaft, and the thrust bearing supports the axial load by supporting this collar.
Small/Miniature Bearings (MRB)
Small bearings and miniature bearings are mainly bearings with an outer diameter of 9 mm or less, and their types include ball bearings and cylindrical roller bearings. The most commonly used type of small bearing, the size of a coin, is a ball bearing.